• The on/off button
  On the right rear side of the screen, you will feel a row of 5 buttons.
  The top button is the on/off button

Connections & controls

1. Function sticker
   This sticker on the side of the screen explains the function of each button (see point 2).

2. Control buttons
   With these buttons on the rear side of the screen, you can adjust settings, such as brightness.

3. HDMI 1 port
   Use this input to connect a device, such as a laptop or PC, via an HDMI cable for video and audio.

4. USB touch connection
   Connect the USB cable here to activate the touch functionality of the screen.

5. Main switch and Power connection
   Connect the power plug here. With the rocker switch, you can fully turn the power supply to the screen on or off.

Basic operation: brightness, zoom & volume

The most frequently used settings are brightness, zoom function, and volume. You will find the buttons for these functions at the top left of the information board. They are indicated by the three icons below: Only adjust the settings using the buttons in the image, and not with the buttons on the back of the information board.

Self-operation

In this section, you will find explanations for the most common operations. If you can’t quite figure it out, don’t change too much and call us

1. Displaying the settings menu

2. Moving the cursor vertically

3. Moving the cursor horizontally

4. Adjusting the volume

5. Choosing a signal source